Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Happy Valley Elementary School

From FireAlarmPedia
Revision as of 23:39, 29 September 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2007

Happy Valley Elementary School is an elementary school located at 3291 Happy Valley Road, in Victoria, British Columbia, Canada. The school opened in 2007, replacing the old building which was destroyed by a fire in 2004.

System Specifications (Main Building)

FACP

The building is protected by a Mircom FX-2000 hybrid-addressable fire alarm system. The panel is located in the main electrical room. The system runs Mircom’s CLIP addressable protocol, and the system coding is continuous.

Notification Appliances

Main Building

Most notification appliances are Mircom BL-10B motor bells (10” gong).

There are Mircom “Select-A-Strobe” FS-240R remote strobes (red, wall-mount, set to 15cd) in the gymnasium and some classrooms.

Portables

The notification appliances are a mix of Edwards MB10-24 motor bells (10” gong) and Simplex 2901-9722 motor bells (10” gong).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations in the main buidling.

The portables have Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B710LPA bases.

There are Mircom 5601A addressable 135 degree fixed/rate-of-rise heat detectors installed in the portables.

Modules

There are Mircom MIX-M501MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.