More actions
Horsethief Lodge is a lodge in Panorama Mountain Resort, BC. It consists of 11 townhome buildings, each building having two units. The 300 and 500 buildings are likely connected together. The buildings were built in 1982, and only have their original pull stations; the fire alarm systems were upgraded around 2014.
System Specifications (300 & 500 wings)
| System Specifications |
|---|
| FACP: Mircom Series 1000? FACP Location: Unknown System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal? Strobes Synchronized: Yes, Mircom Date of last known Upgrade: 2020 Year Opened: 1982 |
FACP
The buildings are protected by a Mircom Series 1000 conventional fire alarm system. The panel location is unknown, and the models are unconfirmed. The system coding is temporal.
Notification Appliances
All notification appliances but one are Mircom "Select-a-Strobe" FS-340R-WP remote strobes (red, wall-mount, set to 75cd).
There is one System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount, set to 75cd) installed in 2020 as a deficiency replacement on the 300 wing.
These replaced Edwards 439D-10AWC vibrating bells (10" gong).
Initiating Devices
Pull Stations
All pull stations but one are the original Edwards 270-SPO conventional pull stations.
There is one GE 270-SPO conventional pull station as a deficiency replacement.
All pull stations are mounted under metal covers or Stopper II covers, as they are outdoors.
Automatic Detection Devices
None noticed.
System Specifications (all other wings)
| System Specifications |
|---|
| FACP: Mircom FA-102T?
FACP Locations: Unknown System Coding: Temporal |
FACP
The buildings are protected by Mircom FA-102T conventional fire alarm systems. The panel locations are unknown, and the models are unconfirmed. The system codings are likely temporal.
Notification Appliances
All notification appliances are Mircom BL-10B motor bells (10" gong).
These replaced Edwards 439D-10AWC vibrating bells (10" gong).
Initiating Devices
Pull Stations
All pull stations are the original Edwards 270-SPO conventional pull stations. These are mounted under either metal covers or Stopper II covers.
Automatic Detection Devices
None Noticed.