More actions
| System Specifications |
|---|
| FACP: Notifier NFS2-640C FACP Location: Main Entrance System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: No Date of last known Upgrade: 2022 Year Opened: 2006 |
Plasti-Fab is a company specializing in styrofoam insulation. This page will cover Plant 23, located at 718 McCool Street, in Crossfield, Alberta, Canada. The plant opened in 2006, and the fire alarm system is mostly original.
System Specifications
FACP
The building is protected by a Notifier NFS2-640C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
Annunciators
There is a Notifier LCD2-80 annunciator in the plant control room of Plant 24.
Notification Appliances
All notification appliances are Notifier KMS-10-24A motor bells (10” gong) mounted on Wheelock RSSP-24MCW strobe plates (set to 15cd).
Initiating Devices
Pull Stations
All pull stations are Notifier MPS-950B conventional single-action pull stations. All stations have Notifier FMM-101A addressable monitor modules attached to them.
Automatic Detection Devices
The boiler room has Notifier FST-851A addressable 135°F fixed-temperature heat detectors. The kitchen and janitor closet have Notifier FST-851RA addressable 135°F fixed/rate-of-rise heat detectors. The electrical room and compressor room have Notifier FSP-851A addressable photoelectric smoke detectors. All detectors are mounted on Notifier B710LPA bases. The building is equipped with a sprinkler system.
Modules
There are Notifier FMM-101A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
EOLs
There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.