Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

SAIT Thomas Riley Building

From FireAlarmPedia
Revision as of 22:29, 11 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST3
FACP Location: Unknown
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70VRMS (audible)
24VDC (visual)
System Coding: Unknown
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 1998
Year Opened: Late 1970s

The Southern Alberta Institute of Technology is a trade school located in Calgary, Alberta. This page will cover the Thomas Riley Automotive Centre, which hosts all automotive-based courses. It was built in the late 1970s, and the fire alarm system was upgraded in 1998.

System Specifications

FACP

The building is protected by an Edwards EST3 addressable fire alarm system. The panel location is unknown, but this building is part of the campus’s EST3 network, and is remotely monitored. The system runs EST’s Signature addressable protocol, and is equipped with voice evacuation. The system is two-stage, however the messages and/or tones are unknown at this time.

Notification Appliances

All notification appliances are Edwards 965-7A-8RW 8” round speaker/strobes (white, ceiling-mount, 70V, 15/75cd).

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices

Not currently known.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all signal circuits.