Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Sandman Signature Sherwood Park

From FireAlarmPedia
Revision as of 22:38, 11 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, SS
Date of last known Upgrade: N/A
Year Opened: 2019

Sandman Signature is a brand of upscale hotels owned by Sandman Hotels. This particular hotel is located at 901 Pembina Rd, Sherwood Park, AB. It was built in 2019, and the fire alarm system is original.

System Specifications (2019-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s Advanced addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD LCD annunciator paired with two Mircom RAX-1048TZDS LED annunciators in a BB-1003 cabinet, located in the lobby.

Notification Appliances

All notification appliances are from System Sensor’s “L-Series” line of products, except when noted.
All common area notification appliances are System Sensor P2RLA-E horn/strobes (red, wall-mount, English only, set to 15cd/electromechanical).
The pool area has a System Sensor “SpectrAlert Advance” P2RKA weatherproof horn/strobe (red, wall-mount, set to 75cd).
The guest rooms have System Sensor P2WLA-E horn/strobes (white, wall-mount, English only, set to 15cd/electromechanical).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout.
Some areas have Mircom MIX-5251APA addressable thermal heat detectors.
All detectors are mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M501APA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.