Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Spring Gardens G (City of Calgary)

From FireAlarmPedia
Revision as of 14:02, 13 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: Early 2010s
Year Opened: 1982

Spring Gardens is a roads maintenance facility owned and operated by the City of Calgary. The facility is located at 840 32 Avenue NE, in Calgary, Alberta, Canada. This page will cover Building G, which is… The building was built in 1982, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances

All notification appliances are Mircom “Select-a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to broadband/15cd).

Initiating Devices

Pull Stations

Most pull stations are Mircom MS-401AD addressable pull stations
There are some Mircom MS-401AP addressable pull stations as deficiency replacements.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors in most areas.
Some areas have Mircom MIX-5251RBA addressable thermal rate-of-rise heat detectors.
All detectors are mounted on System Sensor B210LPA bases.
There are Mircom MIX-3100 addressable photoelectric duct smoke detectors on all air handling units.

EOLs

There are Mircom MP-300 end of line resistor plates on all signal circuits.