Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

St. Martin de Porres High School

From FireAlarmPedia
Revision as of 22:59, 13 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST QuickStart QSC
FACP Location: Caretaker’s Office?
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis Self-Sync
Date of last known Upgrade: 2012
Year Opened: 1998

St. Martin de Porres High School is a catholic high school located at 410 Yankee Valley Blvd, in Airdrie, Alberta, Canada. The school is part of the Calgary Catholic Separate School District (CCSD). The school was built in 1998, and the fire alarm system was upgraded in 2012.

System Specifications (2012-present)

FACP

The building is protected by an EST QuickStart QSC conventional fire alarm system. The panel is likely located in the caretaker’s office. The system coding is temporal.

Annunciators

There is an EST QSA-2-S annunciator with a QSC-CPU-2 CPU and two SL30 zone annunciation cards in the main entrance vestibule.

Notification Appliances

All indoor notification appliances are Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd).
For outdoor notification, there is an Edwards CS405-7A-T weatherproof remote strobe (red, wall-mount) outside the main entrance.

Initiating Devices

Pull Stations

All pull stations are Simplex MS-301C conventional single-action pull stations.

Automatic Detection Devices

There are Edwards EC30U-3 conventional photoelectric smoke detectors throughout the building.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all circuits.

System Specifications (1998-2012)

Former System Specifications
FACP: Simplex 4005
FACP Location: Caretaker's Office?
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A <br/ Year Installed: 1998
Year Decommissioned: 2012

FACP

The building was protected by a Simplex 4005 conventional fire alarm system. The panel was likely located in the caretaker’s office. The system coding was likely continuous.

Annunciators

There was a Simplex 4602-9102 annunciator in the main entrance vestibule.

Notification Appliances

All notification appliances were likely Simplex 4903-9236 horn/strobes (red, wall-mount, 15cd).

Initiating Devices

Pull Stations

All pull stations were Simplex MS-301C conventional single-action pull stations.
These devices are still in use on the current fire alarm system.

Automatic Detection Devices

There were Simplex “TrueAlarm” 4098-9601 conventional photoelectric smoke detectors throughout the building.

EOLs

There are Simplex 2081-9040C end-of-line resistor plates on all circuits.