Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Travel Alberta Canmore Visitor Information Centre

From FireAlarmPedia
Revision as of 17:48, 14 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST FireShield FS502G
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2006

The Travel Alberta Canmore Visitor Information Centre is a rest stop and visitor information centre located at 2801 Bow Valley Trail, Canmore, Alberta. It was built in 2006, and the fire alarm system is original.

System Specifications (2006-present)

FACP

The building is protected by an EST FireShield FS502G conventional fire alarm system. The panel location is unknown. The system coding is temporal.

Notification Appliances

All notification appliances are EST “Genesis” G1-HV15 horn/strobes (white, wall-mount, no marking, set to 15cd).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional pull stations.

Automatic Detection Devices

There are Edwards 283B-PL 135 degree fixed temperature/rate-of-rise heat detectors throughout the building. These have likely been replaced, as they were recalled in 2020.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all circuits.