Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Walmart Supercentre (McKenzie)

From FireAlarmPedia
Revision as of 20:14, 14 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Simplex 4007ES
FACP Location: West Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Genesis Self-Sync
Date of last known Upgrade: 2020
Year Opened: 2002

Walmart is a chain of American supermarkets headquartered in Bentonville, Arkansas. This particular store is located at 4705 130 Avenue SE, in the South Trail Crossing/McKenzie/130th shopping area of Calgary, Alberta, Canada. The store was built in 2002, expanded in 2009, and the fire alarm system was upgraded in 2020.

System Specifications (2020-present)

FACP

The building is protected by a Simplex 4007ES addressable fire alarm system. The panel is located in the west entrance vestibule. The system runs Simplex's IDNet addressable protocol, and the system coding is temporal.

Annunciators

There is a Simplex 4606-9202 annunciator in the east entrance vestibule.

Notification Appliances

All notification appliances are a mix of Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd) and Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd).
These are mounted on poles throughout the storefront, with 2 horn/strobes and 2 remote strobes on each pole. The horn/strobes face opposite each other, as do the remote strobes.

Initiating Devices

Pull Stations

All pull stations are Simplex 4099-9004 addressable single-action pull stations.

Automatic Detection Devices

None noticed.

Modules

There are Simplex 4090-9001 addressable monitor modules supervising the kitchen suppression system, and the sprinkler system's tamper and flow switches.

EOLs

There are Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2002-2020)

Former System Specifications
FACP: EST QuickStart QS1
FACP Location: West Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis Self-Sync
Date of last known Upgrade: N/A
Year Installed: 2002
Year Decommissioned: 2020

FACP

The building was protected by an EST QuickStart QS1 addressable fire alarm system. The panel was located in the west entrance vestibule. The system ran EST's Signature addressable protocol, and the system coding was temporal.

Notification Appliances

All notification appliances were a mix of Edwards "Genesis" G1R-HDVM horn/strobes (red, wall-mount, no marking, set to 15cd) and Edwards G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd).
These were mounted on poles throughout the storefront, with 2 horn/strobes and 2 remote strobes on each pole. The horn/strobes faced opposite each other, as do the remote strobes.

All notification appliances are still in use on the Simplex system.

Initiating Devices

Pull Stations

All pull stations were EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are no detectors in the storefront, as those areas are protected by a sprinkler system with waterflow detection.

Modules

There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs

There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.