Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

FreshCo (Okotoks)

From FireAlarmPedia
Revision as of 09:05, 9 August 2024 by TwentyThree33 (talk | contribs) (1048TZDS not 1032.)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2023
Year Opened: 1998

FreshCo is a discount grocery store chain owned by Sobeys. This particular location is located at 610 Big Rock Lane in Okotoks, Alberta. It was built in 1998 as Safeway, and was converted to FreshCo in 2023. The fire alarm system was upgraded following the renovation.

System Specifications (2023-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the main entrance vestibule.

Notification Appliances

Most notification appliances are Mircom FHS-400C-RR horn/strobes (red, ceiling-mount, set to 15cd).

Some areas have Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd).

For exterior notification, there is a System Sensor "SpectrAlert Advance" SRKA weatherproof remote strobe (red, wall-mount, set to 75cd) outside the main entrance.

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices

None noticed. There is a sprinkler system.

Modules

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

There are System Sensor M500XA isolator modules on the SLC.

EOLs

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (1998-2024)

Former System Specifications
FACP: Mirtone 7532
FACP Location: Main Entrance
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Strobes Synchronized: Yes, self-sync
Date of last known Upgrade: N/A
Year Installed: 1998
Year Decommissioned: 2023

FACP

The building was protected by a Mirtone 7532 conventional fire alarm system. The panel was located in the main entrance. The system coding was continuous.

Notification Appliances

The notification appliances were General Signal MB10-24 motor bells (10" gong) on EST "Integrity" 403-5A-R (15cd) strobe plates.

Initiating Devices

Pull Stations

All pull stations were Mirtone 73353 conventional single-action pull stations.

Automatic Detection Devices

None noticed, there was waterflow protection.

EOLs

There were Mirtone 79064 end-of-line resistor plates on all circuits.