Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Vogue (Condo Building)

From FireAlarmPedia
System Specifications
FACP: Mircom FX-2000

FACP Location: Main Floor Boiler Room

System Type: Addressable

System Line Voltage: 120VAC

NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: NO!

Date of last known Upgrade: 2010s

Year Opened: 2005

Vogue is a 4 story condominium building located at 930 6 Ave SW, Calgary, AB. The building was constructed in 2005 and the system may be original aside from the panel and some deficiency replacements.

System Specifications

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main floor boiler room. The system runs Mircom's Advanced addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator located at the front entrance.

Notification Appliances

Most notification appliances are System Sensor "SpectrAlert" P1224MCKA weatherproof horn/strobes (red, wall-mount, set to electromechanical, 75cd).

There are some System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical) as deficiency replacements, due to the building being a walkup and the horn/strobes being exposed to the elements.

There is one Mircom FHS-400-RR horn/strobe (red, wall-mount, set to 15cd) in the boiler room.

Initiating Devices

Pull Stations

Most pull stations are in outdoor spaces. There are two Mircom MS-401 single-action conventional pull stations mounted at each stairwell/exit, wired to a Mircom MIX-M500DMAP dual monitor module mounted in the West stairwell on each floor to monitor each of the two pull stations on that floor.

Other pull stations consist of Mircom MS-401AP addressable single action pull stations, installed as deficiency replacements.

Automatic Detection Devices

There is a MIX-2251AP at the top of each stairwell, mounted on a System Sensor B210LPA bases.