More actions
| System Specifications |
|---|
| FACP: Mircom FlexNet FACP Location: Various System Type: Two-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 70.7VRMS (Audible) 24VFWR (Visual) System Coding: Unknown Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: N/A Year Opened: 2021 |
Hyatt Place is a chain of midrange hotels owned by Hyatt. The chain is headquartered in Chicago, Illinois, USA, and has locations worldwide. This particular hotel is located at 1415 Rue St-Hubert, in Montreal, Quebec, Canada. The hotel opened in 2021, and the fire alarm system is original.
System Specifications
FACP
The building is protected by a Mircom FlexNet addressable fire alarm system. This is a networked system with several nodes. The system runs Mircom’s Advanced addressable protocol, and is equipped with voice evacuation. The system is configured for two-stage operation, however the messages and/or tones are unknown at this time.
Notification Appliances
All common areas have System Sensor “L-Series” SPSCWLA speaker/strobes (white, ceiling-mount, set to 70V/15cd).
All guest rooms and some common areas have System Sensor SPSWLA speaker/strobes (white, wall-mount, set to 70V/15cd).
Initiating Devices
Pull Stations
All pull stations are Mircom MS-402 addressable two-stage single-action pull stations.
Automatic Detection Devices
There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B210LPA bases.
Modules
There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There are System Sensor M500XA isolator modules on all SLCs.
EOLs
There are Mircom MP-300 end of line resistor plates on all sprinkler circuits and all Class B signal circuits.