Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (Crowfoot)

From FireAlarmPedia

Safeway is a chain of grocery stores. This location is located in Crowfoot, NW Calgary. The store was built in 1984, but the current system is from 2015. Only a few pull stations are original. The system has held up well, no troubles at all since August 2018.

System Specifications

FACP

The current fire panel is a Simplex 4100ES InfoAlarm installed in 2015. It is in the left entrance where you get the carts. It replaced an older 1980s-90s Edwards 6616, possibly after a CPU fail. Despite the panel being addressable, the system is set up in a non-addressable manner. The panel has 16 zones.

Notification Appliances

All of the notification appliances are EST 757H-15PS "PowerSaver" Integrity horn/strobes. They were there when the old panel was there, so possibly the original alarms were not loud enough or something. Installed in the early 2000s.

Initiating Devices

Pull Stations

This store has a great variety of pull stations, due to the age of the store and number of pulls that were defective. There are two Edwards 275-C111 pulls by the right entrance, possibly original. The left entrance where the panel is, there's a Simplex MS-301C pull station on the left of the doors, possibly installed in the early-mid 2000s replacing an Edwards pull. There are two Tyco/Grinnell rebranded Notifier MPS-950B pulls, one in the backroom and one by the juice, in which that one replaced a Notifier MPS-950B in 2018. There is an Edwards 270-SPO in the backroom as well, unknown if original as the logo is hard to see from the backroom doors, the only non "tab" pull station. There is a Mircom MS-401 installed in 2018 at the backroom doors where you can see the 270-SPO. It replaced a Tyco/Grinnell pull.

Automatic Detection Devices

Though there are heat and smoke detectors, it is unknown what they are.