More actions
| System Specifications |
|---|
| FACP: EST3 System Type:Addressable (Two-stage) System Line Voltage: 120VAC NAC Voltage:70.7VRMS (audible) 24VDC (visual) Date of last known Upgrade: 2013 Year Opened: 1956 |
Cambridge Red Deer Hotel & Conference Centre is a hotel in Red Deer, Alberta. It has a large conference centre, as well as a pool, and many other amenities. It opened in 1956, and was renovated in 2007. The fire alarm system was upgraded in 2013. This page will cover both the current and previous fire alarm systems.
System Specifications
FACP
The building is protected by an EST3 addressable fire alarm system. The panel is located behind the front desk. The system runs EST’s Signature-series addressable protocol, is voice evac, and is two stage.
Notification Appliances
The notification appliances vary throughout the hotel. The hallways, lobby area, conference centre, and most other common areas have EST 757-5A-SS70 “Enhanced Integrity” speaker/strobes (70V, red, wall-mount). The pool area has System Sensor “SpectrAlert Advance” SPRKA speakers (70V, red, wall-mount) with EST CS405-7A-T weatherproof remote strobes beside or underneath them.
Initiating Devices
Pull Stations
All pull stations are EST SIGA-270P Signature-series addressable 2-stage single-action pull stations.
Automatic Detection Devices
There are EST SIGA-PS Signature-series addressable photoelectric smoke detectors throughout the facility. The detectors in the rooms are mounted on EST SIGA-AB4G sounder bases.
System Specifications (Previous System)
| System Specifications |
|---|
| FACP: Unknown System Type:Conventional/Hybrid System Line Voltage: 120VAC NAC Voltage:24VDC Date of last known Upgrade: Unknown Year Decommissioned: 2013 |
FACP
The fire alarm panel driving the previous system is unknown. There is no evidence as to what the old panel could have been.
Notification Appliances
Most areas of the hotel had Edwards 439D-6AWC vibrating bells (6” gong) on EST "Integrity" 403-5A-R strobe plates (15cd). The conference centre had Edwards 439D-10AWC vibrating bells (10” gong), also on 403-5A-R strobe plates (15cd).
Initiating Devices
Pull Stations
The pull stations were a mix of Edwards 275-C111 conventional single-action pull stations and Mirtone 73303 conventional single-action pull stations.
Automatic Detection Devices
Unknown.