Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Northland Village Mall

From FireAlarmPedia
System Specifications
FACP: Siemens MXL
FACP Location: West Entrance
System Type: Addressable (Two-Stage)
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: 20BPM (First Stage)
Temporal (GA)
Strobes Synchronized: Yes
Date of last known Upgrade: 2019
Year Opened: 1971
Year Decommissioned: 2022

Northland Village Mall is a partially-unused mall located at 5111 Northland Drive NW, in Calgary, Alberta, Canada. The mall opened in 1971, and is in the process of being redeveloped. The mall will soon be demolished, and transformed into an open air shopping centre. The fire alarm system was installed in 2005. Note: This page is for the main mall building. If you are looking for the Best Buy or Walmart, click on the respective name above.

Former System Specifications (2005-2022)

FACP

The building was protected by a Siemens MXL addressable fire alarm system. The panel was located near the former west entrance. The system ran Siemens’ FirePrint addressable protocol, and was configured for two-stage operation. First stage coding was 20BPM, followed by temporal in general alarm. General alarm timer length was 5 minutes.

Notification Appliances

Most notification appliances were Siemens U-MMT-MCS-B multi-tone horn/strobes (red, wall-mount, set to continuous horn). Some areas had Siemens MTH-MC-R-B multi-tone horn/strobes (red, wall-mount, set to continuous horn) as deficiency replacements. The Walmart formerly had Siemens U-MMT-S17-C horn/strobes (red, wall-mount, 15cd), which were replaced when an independent system was installed. The Best Buy formerly had Siemens U-MMT-MCS-W-B horn/strobes (white, wall-mount), which were replaced when an independent system was installed. Some areas had Siemens ZH-MC-R horn/strobes (red, wall-mount). All horns were set to continuous horn.

Initiating Devices

Pull Stations

All pull stations were Cerberus/Siemens MSI-30B addressable two-stage single-action pull stations. Some were branded Cerberus, while others were branded Siemens.

Automatic Detection Devices

There were Siemens FP-11 addressable multisensor smoke/heat detectors throughout the building.