Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Cambridge Red Deer Hotel & Conference Centre

From FireAlarmPedia
Revision as of 20:10, 27 December 2023 by Alberta Fire Alarms (talk | contribs)
System Specifications
FACP: Edwards EST3

FACP Location: Behind Front Desk
System Type:Addressable (Two-stage)
System Line Voltage: 120VAC
NAC Voltage:70.7VRMS (audible)
24VDC (visual)

System Coding: Unknown

Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2013
Year Opened: 1956

Cambridge Red Deer Hotel & Conference Centre is a hotel in Red Deer, Alberta. It has a large conference centre, as well as a pool, and many other amenities. It opened in 1956, and was renovated in 2007. The fire alarm system was upgraded in 2013. This page will cover both the current and previous fire alarm systems.

System Specifications (2013-present)

FACP

The building is protected by an Edwards EST3 addressable fire alarm system. The panel is located behind the front desk. The system runs EST’s Signature addressable protocol, and is equipped with voice evacuation. The system is configured for two-stage operation, however the messages and/or tones are unknown at this time.

Notification Appliances

The notification appliances vary throughout the hotel. The hallways, lobby area, conference centre, and most other common areas have EST 757-5A-SS70 “Enhanced Integrity” speaker/strobes (70V, red, wall-mount). The pool area has System Sensor “SpectrAlert Advance” SPRKA speakers (70V, red, wall-mount) with EST CS405-7A-T weatherproof remote strobes (red, wall-mount, 15/75cd) beside or underneath them.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270P addressable two-stage single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the facility. The detectors in the rooms are mounted on EST SIGA-AB4G sounder bases, and are mounted on EST SIGA-SB bases in common areas. There is also a sprinkler system with waterflow detection.

Modules

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.


System Specifications (Previous System) (Early 1990s-2013)

System Specifications
FACP: Edwards EST3
System Type: Conventional
System Line Voltage: 120VAC
NAC Voltage:24VDC

System Coding: Continuous

Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2000s
Year Decommissioned: 2013

FACP

The building was protected by an Edwards EST3 conventional fire alarm system. The panel was located behind the front desk. The system coding was continuous.

Notification Appliances

Most areas of the hotel had Edwards 439D-6AWC vibrating bells (6” gong) on EST "Integrity" 403-5A-R strobe plates (15cd). The conference centre had Edwards 439D-10AWC vibrating bells (10” gong), also on 403-5A-R strobe plates (15cd). There was also one Mircom FS-240R remote strobe (red, wall-mount, 30cd)

Initiating Devices

Pull Stations

The pull stations were a mix of Edwards 275-C111 conventional single-action pull stations and Mirtone 73303 conventional single-action pull stations.

Automatic Detection Devices

Unknown.