Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Northland Village Mall

From FireAlarmPedia
Revision as of 16:10, 22 February 2024 by TwentyThree33 (talk | contribs)
System Specifications
FACP: Siemens MXL
FACP Location: West Entrance
System Type: Addressable (Two-Stage)
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: 20BPM (Alert)
Temporal (Alarm)
Strobes Synchronized: Yes
Date of last known Upgrade: 2019
Year Opened: 1971
Year Decommissioned: 2022

Northland Village Mall was a mall located at 5111 Northland Drive NW, in Calgary, Alberta, Canada. The mall opened in 1971, and was demolished in 2022. The fire alarm system was installed in 2005.

Note: This page is for the former main mall building. If you are looking for the Best Buy or Walmart, click on the respective name above.

Former System Specifications (2005-2022)

FACP

The building was protected by a Siemens MXL addressable fire alarm system. The panel was located near the former west entrance. The system ran Siemens’ FirePrint addressable protocol, and was configured for two-stage operation. Alert signal coding was 20BPM, followed by temporal as alarm signal. General alarm timer length was 5 minutes.

Notification Appliances

Most notification appliances were Siemens U-MMT-MCS-B multi-tone horn/strobes (red, wall-mount, set to continuous horn/15cd).

Some areas had Siemens MTH-MC-R-B multi-tone horn/strobes (red, wall-mount, set to continuous horn/15cd) as deficiency replacements.

The Walmart formerly had Siemens U-MMT-S17-C horn/strobes (red, ceiling-mount, 15cd) installed on the walls, which were replaced when an independent system was installed. The same horn/strobes could be found in the hallways, some with wall orientation "FIRE" stickers.

The Best Buy formerly had Siemens U-MMT-MCS-W-B horn/strobes (white, wall-mount), which were replaced when an independent system was installed.

Some areas had Siemens ZH-MC-R horn/strobes (red, wall-mount). All horns were set to continuous horn.

There was a Siemens MBDC-6C motor bell (6" gong) in an entrance vestibule, however the purpose was unknown.

Initiating Devices

Pull Stations

All pull stations were Cerberus/Siemens MSI-30B addressable two-stage single-action pull stations. Some were branded Cerberus, while others were branded Siemens.

Automatic Detection Devices

There were Siemens FP-11 addressable multisensor smoke/heat detectors throughout the building. There was also sprinkler system with waterflow detection.

Modules

There were Siemens TRI-M addressable monitor modules supervising the sprinkler system's tamper and flow switches.