Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Spruce Ridge Estates Building 3362/3364

From FireAlarmPedia
Revision as of 22:00, 11 August 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FA-1000 <br />FACP Location: 3364 Entrance Vestibule <br />System Type: <br /...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: 3364 Entrance Vestibule
System Type:
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: 2010s
Year Opened: 1953

Spruce Ridge Estates is an apartment complex owned by Boardwalk. This page will cover Building 3362/3364, located at 3362, 19A Hemlock Crescent SW, in Calgary, Alberta, Canada. The building was built in 1953, and was renovated in 1997. The fire alarm system was upgraded in 1997, with additional upgrades occurring in the 2010s including a panel replacement.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel is located in the main entrance vestibule of 3364. The system coding is temporal.
This panel was installed in the 2010s and replaced a Notifier System 500.

Annunciators

There is a Mircom RAM-1032TZDS annunciator in the 3362 main entrance vestibule, mounted inside a BB-1001 enclosure.

Notification Appliances

All common areas have System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd).
It is unknown if there are in-suite devices.

Initiating Devices

Pull Stations

All pull stations are Notifier NFM-950B conventional single-action pull stations.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors in all corridors and stairwells.
There are FDD CR-135 conventional 135°F fixed-temperature/rate-of-rise heat detectors in the storage rooms under each stairwell.
There are Mircom TD-135 conventional 135°F fixed-temperature heat detectors in the mechanical room.
There is a System Sensor DH100LPA conventional photoelectric duct smoke detector on one fan unit.
There is a System Sensor D2A conventional photoelectric duct smoke detector on the other fan unit.

EOLs

There are Notifier EOL-CR end of line resistor plates on all circuits.