Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Holiday Inn & Suites Grande Prairie

From FireAlarmPedia
Revision as of 00:49, 15 August 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000

FACP Location: Main Entrance Vestibule
System Type: Single Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized Yes, Mircom
Date of last known Upgrade: N/A
Year Opened: 2008

Holiday Inn and Suites is a chain of lower-midrange hotels owned by IHG. They are headquartered in Denham, England, and have locations globally. This particular hotel is located at 9816 107 Street, Grande Prairie, Alberta, Canada. The hotel opened in 2008, and has the original fire alarm system.

System Specifications (2008-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All common area notification appliances are Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, 15cd).

The guest rooms have Mircom MH-S25WA silenceable mini-horns (white, wall-mount), with Mircom “Select-A-Strobe” FS-240W remote strobes (white, wall-mount) mounted below them.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B710LPA low-profile bases.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistors on all sprinkler and signal circuits.