Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

1232 26 Avenue SE, Calgary

From FireAlarmPedia
Revision as of 10:53, 19 August 2024 by TwentyThree33 (talk | contribs) (Added outdoor signals. Last update: Added booster, EOLs and infobox updates.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST2
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, EST Self-Sync
Date of last known Upgrade: 2010s
Year Opened: 2001

1232 26 Avenue Southeast is the address of a small industrial plaza in Calgary, Alberta, Canada. The building consists of: Cambium Woodwork, Saltillo Tile, ISC Calgary, The Master Group, Soper’s Supply Ltd., Keller Equipment Supply, City Electric Supply, Stone Selection Ltd., and KBM Commercial Floor Coverings. The building opened in 2001, and the fire alarm system is original except for deficiency replacements.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main electrical room. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.

Boosters[edit | edit source]

There is an Edwards BPS6A booster power supply in the main electrical room.

Notification Appliances[edit | edit source]

Most notification appliances are Edwards “Integrity Powersaver” 757H-15PS horn/strobes (red, wall-mount, 15cd).
Some areas have Edwards “Integrity” 757-5A-T horn/strobes (red, wall-mount, 15cd) as deficiency replacements.
For outdoor notification, there is an Edwards MB6-24 motor bell (6" gong) and an Edwards 202-5A-T remote strobe (red, wall-mount, 15cd) outside the main electrical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors at the top of each stairwell, mounted on EST SIGA-SB bases. The building is equipped with a wet sprinkler system.

Modules[edit | edit source]

There are EST SIGA-WTM addressable “waterflow-tamper” monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.