More actions
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2020 Year Opened: 1981 |
The Chantal Berube Youth Centre is a youth centre located at 5202 50 Street, in Beaumont, Alberta, Canada. The building was built in 1981 as the town hall, was converted into a library in 1991, and became a youth centre in 2004. The fire alarm system was upgraded in 1991, and again in 2020.
System Specifications (2020-present)[edit | edit source]
FACP[edit | edit source]
The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel location is unknown. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.
Annunciators[edit | edit source]
There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator in the main entrance vestibule.
Notification Appliances[edit | edit source]
All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
All pull stations are Notifier NBG-12LX addressable dual-action pull stations.
Automatic Detection Devices[edit | edit source]
There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the building, mounted on System Sensor B300A-6 bases.
EOLs[edit | edit source]
There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.
| Former System Specifications (1991-2020) |
|---|
| FACP: Notifier System 500 FACP Location: Unknown System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Continuous Strobes Synchronized: No Date of last known Upgrade: 2000s Year Installed: 1991 Year Decommissioned: 2020 |
System Specifications (1991-2020)[edit | edit source]
FACP[edit | edit source]
The building was protected by a Notifier System 500 conventional fire alarm system. The panel location was unknown. The system coding was continuous.
Annunciators[edit | edit source]
There was a Notifier ACM-24AT annunciator in the main entrance vestibule.
Notification Appliances[edit | edit source]
All notification appliances were Wheelock MBS-G10-24 motor bell/strobes (10” gong, 1.5cd).
Initiating Devices[edit | edit source]
Pull Stations[edit | edit source]
Most pull stations were Notifier FM-950B conventional single-action pull stations.
Some areas had Mircom MS-401 conventional single-action pull stations as deficiency replacements.
Automatic Detection Devices[edit | edit source]
There were System Sensor 1400A conventional ionization smoke detectors throughout the building.
EOLs[edit | edit source]
There were Notifier EOL-CR end of line resistor plates on all signal circuits.