Eaglemont Manor

System Specifications
FACP: Mircom FX-2000 FACP Location: Unknown System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, Mircom Date of last known Upgrade: N/A Year Opened: 2013

Eaglemont Manor is an apartment complex located at 5301 Rue Eaglemont, Beaumont, Alberta. The building was constructed in 2013, and the fire alarm system is original.

System Specifications (2013-present)

FACP

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators

There is a Mircom RAX-LCD annunciator paired with a Mircom RAX-1048TZDS annunciator in the main entrance vestibule.

Notification Appliances

All common area notification appliances are Mircom “Select–a-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to 15cd/electromechanical).
Each bedroom has a Mircom MH-S25W mini horn (white, wall-mount, silenceable).
For exterior notification, there is a Mircom FS-340R-WP weatherproof remote strobe (red, wall-mount, set to 75cd).

Initiating Devices

Pull Stations

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices

There are Mircom MIX-2251BA addressable photoelectric smoke detectors located throughout, mounted on System Sensor B210LPA bases.

Modules

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs

There are Mircom MP-300 end-of-line resistors on all sprinkler and signal circuits.