Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

6703 48 Ave, Camrose

From FireAlarmPedia
Revision as of 15:35, 7 September 2024 by TwentyThree33 (talk | contribs) (Corrected infobox and added EOLs.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: 2013
Year Opened: Unknown

6703 48 Ave is the address given to a small plaza in Camrose, Alberta. It consists of Bulk Barn, Mark’s and Sport Chek. It is unknown when the building was built, but was Canadian Tire until 2013, and since then has had the three tenants. The fire alarm system was installed when the tenants moved in.

System Specifications (2013-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD LCD annunciator outside between Bulk Barn and Mark’s.

Notification Appliances[edit | edit source]

All notification appliances are from Mircom’s “Select-a-Horn/Strobe” line of products. All indoor notification appliances are Mircom FHS-340R horn/strobes (red, wall-mount, set to Broadband, 15cd).
For outdoor notification, there is a Mircom FHS-340R-WP weatherproof horn/strobe (red, wall-mount, set to broadband 75cd) above the annunciator.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.