Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

8805 Highway 11, Iroquois Falls

From FireAlarmPedia
Revision as of 10:26, 8 September 2024 by TwentyThree33 (talk | contribs) (Falls)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Siemens FireFinder XLS
FACP Location: Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, Siemens
Date of last known Upgrade: 2010s
Year Opened: circa 1987

8805 Highway 11 is the address given to an industrial complex in Iroquois Falls, Ontario. It has two separate manufacturing/service areas. It was built in 1987, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Siemens FireFinder XLS addressable fire alarm system. The panel is located near the main entrance. The system runs Siemens’ FirePrint addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are Siemens MTH-MC-R-B multi-tone horn/strobes (red, wall-mount, bilingual lettering, set to horn/15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Siemens HMS-SA addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are System Sensor EPS10-1 alarm pressure flow switches monitoring the sprinkler system. These and the tamper switches are wired to Siemens XTRI-D addressable monitor modules.

EOLs[edit | edit source]

There are Siemens EL-300C end of line resistor plates on all sprinkler and signal circuits.