Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Abbotsford Place Building 1

From FireAlarmPedia
Revision as of 12:14, 8 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier System 500
FACP Location: Unknown
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: N/A
Year Opened: 1993

Abbotsford Place is a set of three condominium buildings in Abbotsford, British Columbia. This page will cover Building 1, located at 32830 George Ferguson Way. It was built in 1993, and the fire alarm system is original.

System Specifications (1993-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier System 500 conventional fire alarm system. The panel location is unknown. The system coding is continuous.

Annunciators[edit | edit source]

There is a Notifier ACM-16AT LED annunciator in the lobby.

Notification Appliances[edit | edit source]

All notification appliances are Notifier KMS-10-24VDC/P motor bells (10” gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NFM-950B conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are System Sensor 1400A conventional ionization smoke detectors throughout.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all circuits.