Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

All Saints High School (Calgary)

From FireAlarmPedia
Revision as of 12:29, 8 September 2024 by TwentyThree33 (talk | contribs)
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: N/A
Year Opened: 2018

All Saints High School is a Roman Catholic high school located at 729 Legacy VIllage Road Southeast, in Calgary, Alberta, Canada. The school is owned and operated by the Calgary Catholic School District (CCSD). The school has a capacity of 1,500 students according to the Alberta government website. The school opened in 2018, and the fire alarm system is original.

System Specifications

Please note that some information is unconfirmed, as staff could not gain building access.

FACP

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature-series addressable protocol, and the system coding is temporal.

Notification Appliances

All indoor spaces except student washrooms have Edwards “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd). The student washrooms have Edwards G1R-VM remote strobes (red, wall-mount, no lettering, set to 15cd). For outdoor notification, there are Edwards WG4RF-HVMC weatherproof horn/strobes (red, wall-mount, set to 110cd) around the exterior of the school.

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are Edwards SIGA-PD addressable photoelectric smoke detectors throughout the school, mounted on EST SIGA-SB bases.

Modules

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLS

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.