Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Banff Woods Lodge

From FireAlarmPedia
Revision as of 11:44, 8 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards EST2

FACP Location: Main Building Lobby
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: 2015
Year Opened: 2003

Banff Woods Lodge is a 2-story hotel located at 1200 Harvie Heights Rd, Harvie Heights, AB, near Canmore. It opened in 2003 as the Inn of the Rockies, and became Banff Woods Lodge in 2021. The hotel consists of five buildings set up like a townhouse. Each unit has two floors, and all buildings are monitored by the same fire alarm system. The system is original.

System Specifications (2003-present)[edit | edit source]

FACP[edit | edit source]

The buildings are protected by an Edwards EST2 addressable fire alarm system. The panel is located in the main building's lobby near the desk. The system monitors every building as a network. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are from EST's "Genesis" line of products.

Main Building (Pool Area, Gym, Lobby)[edit | edit source]

All notification appliances but one are EST G1R-HV15 horn/strobes (red, wall-mount, no lettering, 15cd, first gen).

There is an EST G1R-HDVM horn/strobe (red, wall-mount, no lettering, set to 15cd) above the panel as a deficiency replacement for an EST 692-5A-HSR mini-horn/strobe (red, 15cd).

Units[edit | edit source]

All units have an EST G1-HV15 horn/strobe (white, wall-mount, no lettering, 15cd, first gen) in the living area.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations. These are only in the main building.

Automatic Detection Devices[edit | edit source]

The main building has EST SIGA-PS addressable photoelectric smoke detectors.

The units have EST SIGA-HRS addressable rate-of-rise/fixed heat detectors, at the top of each stairwell.

All detectors are mounted on SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.