Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Barlow/Max Bell Station

From FireAlarmPedia
Revision as of 11:52, 8 September 2024 by TwentyThree33 (talk | contribs) (a)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST QuickStart QS1
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Unknown
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2010s
Year Opened: 1985

Barlow/Max Bell Station is a Blue Line CTrain station located at 2022 Memorial Drive Southeast, in Calgary, Alberta, Canada. The station opened in 1985, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the main electrical room. The system runs EST’s Signature addressable protocol, and the system coding is likely temporal.

Notification Appliances[edit | edit source]

The only audible notification appliance is an Edwards “Adaptabel” 333D single-stroke bell (6” gong).
There are Edwards “Genesis” G1R-VM remote strobes (red, wall-mount, no marking, set to 15cd) throughout the staff hallway.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.