Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Battle River Implements Ltd. (Killam)

From FireAlarmPedia
Revision as of 11:54, 8 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST iO64
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, EST
Date of last known Upgrade: N/A
Year Opened: 2011-13

Battle River Implements is a chain of John Deere stores and service centres. This particular location is located at 5907 51 Ave, Killam, AB. It was built in the early 2010s, and the fire alarm system is original.

System Specifications (early 2010s-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST iO64 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs EST’s Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All indoor notification appliances are EST “Genesis” G1R-HDVM horn/strobes (red, wall-mount, no lettering, set to 15cd).
For outdoor notification, there is an EST “Integrity” 757-1A-T remote horn (red).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.