Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Bruce Park Place

From FireAlarmPedia
Revision as of 17:12, 9 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST 6632
FACP Location: Lobby
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Continuous
Date of last known Upgrade: N/A
Year Opened: 1995

Bruce Park Place is an apartment building located at 1976 Portage Ave, Winnipeg, MB. It was built in 1995, and the fire alarm system is original.

System Specifications (1995-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an EST 6632 conventional fire alarm system. The panel is located in the lobby. The system coding is continuous.

Notification Appliances[edit | edit source]

All notification appliances are Edwards 439D-10AWC vibrating bells (10” gong).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards 270-SPO conventional pull stations.

Automatic Detection Devices[edit | edit source]

There are Edwards 6250C ionization smoke detectors located throughout, and Edwards 281C conventional fixed/rate-of-rise heat detectors in some areas. There is also a sprinkler system with waterflow detection.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all circuits.