Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Fire Department Vehicle Storage

From FireAlarmPedia
Revision as of 15:35, 11 September 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Electrical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: N/A
Year Opened: 2014, 2023

The Calgary Fire Department is the fire department serving the City of Calgary. This page will cover the vehicle storage building, located at 5701 23 Avenue SE, in Calgary, Alberta, Canada. The building was built in 2014, and expanded in 2023. The fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main electrical room. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Notifier LCD2-80 annunciator paired with a Notifier ACM-24AT annunciator at the main entrance.

Notification Appliances[edit | edit source]

The original building has System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).
There is one System Sensor P2RKA weatherproof horn/strobe (red, wall-mount) on the south wall of the original building.
The addition has System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd) and PC2RLA horn/strobes (red, ceiling-mount, set to 15cd).
For outdoor notification, there is a System Sensor SRKA weatherproof remote strobe (red, wall-mount) outside the main entrance.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The original building has Notifier N-MPS-SA addressable single-action pull stations.
The addition has Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the original building, mounted on System Sensor B210LPA bases.
There are Notifier FSP-951A addressable photoelectric smoke detectors throughout the addition, mounted on System Sensor B300A-6 bases.

Modules[edit | edit source]

There is a Notifier FRM-1A addressable relay module for door release.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all signal circuits.