Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Four Points by Sheraton Edmonton Gateway

From FireAlarmPedia
Revision as of 23:58, 16 September 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 w/ QX-5000 <br />FACP Location: Unknown <br />System Type: Two-Stage A...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000 w/ QX-5000
FACP Location: Unknown
System Type: Two-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70VRMS (audible)
24VFWR (visual)
System Coding: Unknown
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Year Opened: 2012

Four Points by Sheraton is a hotel brand owned by Marriott that targets business travelers and small conventions. This particular hotel is located at 10010 12 Ave SW, Edmonton, Alberta. The hotel opened in 2012, and the fire alarm system is original.

System Specifications (2012-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s CLIP addressable protocol, and is equipped with the Mircom QX-5000 voice-evacuation system. The system is configured for two-stage operation. The tones and/or messages are unknown.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator by the front desk.

Notification Appliances[edit | edit source]

Most common area notification appliances are Mircom SPS-104A-70 speaker/strobes (ceiling-mount, round, 4”, set to 15/75cd).
There are Mircom SP-104A-70 speakers (ceiling-mount, round, 4) in each guest room and in common areas for additional audible coverage.
There are Mircom “Select-a-Strobe” FS-340W remote strobes (white, wall-mount, set to 15cd) in all public washrooms.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-402AD addressable two-stage pull stations. The one in the lobby is fitted with a Mircom MS-DA dual-action lever.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251BA addressable photoelectric smoke detectors throughout the common areas.
Central Social Hall has a Mircom MIX-5251HBA addressable 190°F fixed-temperature heat detector.
All detectors are mounted on System Sensor B710LPA bases.

Modules[edit | edit source]

There are Mircom MIX-M501MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.