Edward Milne Community School

System Specifications
FACP: Simplex 4100+ FACP Location: Main Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Continuous Strobes Synchronized: N/A Date of last known Upgrade: N/A Year Opened: 1996

Edward Milne Community School is a school located at 6218 Sooke Road, in Sooke, British Columbia, Canada. The school opened in 1996, and the fire alarm system is mostly original. The theatre has a separate fire alarm system from the rest of the building.

System Specifications (Main Building)

FACP

The building is protected by a Simplex 4100+ conventional fire alarm system. The panel is located in the main electrical room. The system coding is continuous.

Annunciators

There is a Simplex 4602-9102 annunciator paired with three Simplex 4602-9101 annunciators outside the main entrance.

Notification Appliances

All notification appliances are Simplex 2901-9722 motor bells (10” gong).

Initiating Devices

Pull Stations

All pull stations but one are Simplex MS-301C conventional single-action pull stations. There is a Mircom MS-401 conventional single-action pull station near one exit as a deficiency replacement.

Automatic Detection Devices

There are Simplex 2098-9110 conventional ionization smoke detectors throughout the building. There are Simplex 2098-9465 duct smoke detectors on all air handling units. The building is equipped with a sprinkler system.

System Specifications (Theatre)

System Specifications
FACP: EST FireShield FACP Location: Main Electrical Room System Type: Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal? Strobes Synchronized: No Date of last known Upgrade: N/A Year Opened: 1996

FACP

The theatre is protected by an EST FireShield FS302G conventional fire alarm system. The panel is located in the main electrical room. The system coding is likely temporal.

Annunciators

There is an EST FSRSI annunciator paired with an EST FSRZI annunciator outside the building, mounted on an EST FSAT-2 chassis.

Notification Appliances

All notification appliances are Edwards 439D-6AWC vibrating bells (6” gong) mounted on Edwards 403-5A-R strobe plates (15cd).

Initiating Devices

Pull Stations

All pull stations are Edwards 270-SPO conventional single-action pull stations.

Automatic Detection Devices

There are Edwards 281B-PL conventional 135°F fixed/rate-of-rise heat detectors mounted on the walls. There is an FDD CR135 conventional 135°F fixed/rate-of-rise heat detector mounted at the top of the theatre.