Erlton/Stampede Station

System Specifications
FACP: EST QuickStart QS1 FACP Location: Electrical Room, Platform Level System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Strobes Synchronized: Yes, EST Self-Sync Date of last known Upgrade: 2000s Year Opened: 1981

Erlton/Stampede Station is an LRT station located at 2408 3A Street Southeast, in Calgary, Alberta, Canada. The station primarily serves the south half of Stampede Park, and the neighborhood of Erlton. The station opened in 1981, and was expanded to accommodate 4-car trains in 2011. The fire alarm system was upgraded in the 2000s, and no original devices remain.

System Specifications (2000s-present)

FACP

The building is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the main electrical room, which is accessible via the tracks. The system runs EST’s Signature addressable protocol, and the system coding is temporal.

Annunciators

There is an EST QSA-1-S annunciator on the mezzanine level. The annunciator is equipped with an EST QS1-CPU-1 control card, and an SL30L zone annunciation card.

Notification Appliances

All notification appliances are Edwards MB10-24 motor bells (10” gong) mounted on Edwards 403-5A-R strobe plates (15cd).

Initiating Devices

Pull Stations

All pull stations are EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices

There are EST SIGA-PS addressable photoelectric smoke detectors throughout the station, mounted on EST SIGA-SB bases.

EOLs

There are Edwards EOL-P1 end of line resistor plates on all signal circuits.