Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Holiday Inn Hinton

From FireAlarmPedia
Revision as of 11:11, 30 September 2024 by TwentyThree33 (talk | contribs) (→‎Former System Specifications (2000s-2022))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Edwards iO1000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: 2022
Year Opened: 1976

Holiday Inn is a chain of hotels owned by Intercontinental. This particular hotel is located at 393 Gregg St, Hinton, AB. It was built in 1976, and renovated in 2010. The fire alarm system was upgraded in 2022.

System Specifications (2022-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by an Edwards iO1000 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Edwards’ Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All common area notification appliances are Edwards “Genesis” G1AVRF horn/strobes (red, wall-mount, FIRE marking, set to 15cd).
The guest rooms have Edwards 683-1C silenceable mini-horns (white).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Edwards SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Edwards SIGA-PD addressable photoelectric smoke detectors throughout, mounted on SIGA-SB bases.

Modules[edit | edit source]

There are Edwards SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

There are Edwards SIGA-CR addressable relay modules serving various purposes.

There are Edwards SIGA-IM addressable isolator modules on the SLC.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2000s-2022)[edit | edit source]

System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal?
Strobes Synchronized: No
Date of last known Upgrade: Early 2010s
Year Installed: 2000s
Year Decommissioned: 2022

FACP[edit | edit source]

The building was protected by a Mircom FX-2000 addressable fire alarm system. The panel was located in the main entrance vestibule. The system ran Mircom’s CLIP addressable protocol, and the system coding was most likely temporal.

Notification Appliances[edit | edit source]

All common area notification appliances but the weight room and pool area were System Sensor “SpectrAlert” P2415A horn/strobes (red, wall-mount, 15cd, set to electromechanical).
The weight room had a Mircom “Select-a-Horn/Strobe” FHS-240R horn/strobe (red, wall-mount, set to 15cd/electromechanical) as a deficiency replacement.
The pool area had Mircom BL-10B motor bells (10” gong) on Amseco RSB24-153075 strobe plates (set to 15cd).
The guest rooms had Mircom MH-S25W mini-horns (white, silenceable).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There were Mircom MIX-2251BA addressable photoelectric smoke detectors throughout, mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There were Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.