Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (Montgomery)

From FireAlarmPedia
Revision as of 23:32, 11 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2022
Year Opened: 1998

Safeway Canada is a chain of grocery stores. They are owned by Sobeys, and have locations across the country. This particular store is located at 5048 16 Ave NW, Calgary, Alberta. The store opened in 1998, and was renovated in 2022. The fire alarm system was upgraded during the renovation.

System Specifications (2022-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel location is unknown. The system runs Mircom’s Advanced addressable protocol, and the system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RAX-LCD annunciator in an entrance vestibule.

Notification Appliances[edit | edit source]

All indoor notification appliances are Mircom FHS-400-RR horn/strobes (red, wall-mount, set to 15cd), mounted on the ceiling.
For exterior notification, there is a System Sensor “SpectrAlert Advance” SRKA weatherproof remote strobe (red, wall-mount, set to 75cd) outside the main entrance vestibule.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AP addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251APA addressable photoelectric smoke detectors in the backroom, mounted on System Sensor B210LPA bases. The storefront is protected by waterflow.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (1998-2022)[edit | edit source]

Former System Specifications
FACP: Edwards EST3X
FACP Location: Unknown
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal?
Strobes Synchronized: Yes, self-sync
Date of last known Upgrade: 2019 <br/ Year Installed: 1998
Year Decommissioned: 2022

FACP[edit | edit source]

The building was protected by an Edwards EST3X addressable fire alarm system. The panel location was unknown. The system ran Edwards’ Signature addressable protocol, and the system coding was likely temporal.
This panel replaced the original Edwards EST2 in 2019.

Annunciators[edit | edit source]

There was an Edwards EST 4X-LCD LCD annunciator in an entrance vestibule.

Notification Appliances[edit | edit source]

All notification appliances were General Signal MB10-24 motor bells (10” gong) mounted on EST “Integrity” 403-5A-R strobe plates (15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations were EST SIGA-270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There were EST SIGA-PS addressable photoelectric smoke detectors in the backroom, mounted on SIGA-SB bases. The storefront was protected by waterflow.

Modules[edit | edit source]

There were EST SIGA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.

EOLs[edit | edit source]

There were Edwards EOL-P1 end-of-line resistor plates on all sprinkler and signal circuits.