Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Safeway (Southcentre)

From FireAlarmPedia
Revision as of 22:34, 11 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: EST Quickstart QS1

FACP Location: Left Entrance

System Type: Single-Stage Hybrid-Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR

System Coding: Temporal

Strobes Synchronized: Yes
Date of last upgrade: 2010s
Year Built: 1985

Safeway is a chain of grocery stores across Canada and the USA. This particular store is located at 11011 Bonaventure Dr SE in Calgary. It was built in 1985, and the fire alarm system was upgraded in the 2000s.

System Specifications (2000s-present)[edit | edit source]

FACP[edit | edit source]

The store is protected by an EST QuickStart QS1 addressable fire alarm system. The panel is located in the left entrance. it was installed in the 2010s, replacing an older variant. The system runs EST's Signature addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are EST "Genesis" G1R-HDVM (red, wall mount, no FIRE) horn/strobes mounted on G1F-FIRE trim plates ("FIRE").

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The pull stations are mainly a mix of third-generation Edwards 270-SPO pull station and second-generation EST SIGA-270 addressable pull stations.

There is one original 2nd generation Edwards 270-SPO, located by the back exit. The conventional 270-SPO's are likely wired to SIGA-CT1 addressable modules.

Automatic Detection Devices[edit | edit source]

The areas with lower ceilings have EST SIGA-PS addressable photoelectric smoke detectors, mounted on SIGA-SB bases. There is waterflow protection elsewhere in the store.

Modules[edit | edit source]

There are EST SIGA-CT1 addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Edwards EOL-P1 end-of-line resistor plates on all conventional, sprinkler and signal circuits.