Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Mail is now working! Feel free to request an account. Accounts are available to invested enthusiasts/technicians in the industry. :)

Scenic Bow Group Home 18

From FireAlarmPedia
Revision as of 21:01, 12 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1025T
FACP Location: Main Office
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Date of last known Upgrade: 2010s
Year Opened: 1987

Scenic Bow Place is a group home complex owned by Alberta Health Services. This page will cover Group Home 18, located at #104 100 Scenic Bow Place NW, in Calgary, Alberta, Canada. The home was built in 1987, and the fire alarm system was fully replaced in the 2010s.

System Specifications (2010s-present)

FACP

The building is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located in the main office. The system coding is temporal.

Notification Appliances

The only notification appliance is a Simplex 4080-5 vibrating bell (6” gong).

Initiating Devices

Pull Stations

There are no pull stations on this system.

Automatic Detection Devices

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout all living areas.
There are System Sensor 5601A conventional 135-degree fixed-temperature/rate-of-rise heat detectors in all non-living areas.
There are FDD CR-135 conventional 135-degree fixed-temperature/rate-of-rise heat detectors in the basement storage rooms.
There are System Sensor 5603A conventional fixed-temperature heat detectors in the kitchen and furnace room.

EOLs

There are Simplex 2081-9018C end-of-line resistor plates on all circuits.