More actions
| System Specifications |
|---|
| FACP: Notifier NFS-320C FACP Location: Electrical Room System Type: Single-Stage Addressable System Line Voltage: 120VAC NAC Voltage: 24VDC System Coding: Temporal Strobes Synchronized: Yes, System Sensor Date of last known Upgrade: 2021 Year Opened: 1979 |
The Midnapore Mall is a strip mall located at 240 Midpark Way SE, in Calgary, Alberta, Canada. The building was built in 1979 as an indoor shopping mall, and was converted into a strip mall in 2000. The fire alarm system was upgraded in 2021.
System Specifications
FACP
The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in an electrical room. The system runs Notifier's FlashScan addressable protocol, and the system coding is temporal.
Notification Appliances
All notification appliances are System Sensor "L-Series" P2RLA horn/strobes (red, wall-mount, set to 15cd).
Initiating Devices
Pull Stations
All pull stations are Notifier N-MPS-SA addressable single-action pull stations.
Automatic Detection Devices
None noticed.
Modules
There are Notifier FMM-1A addressable monitor modules supervising the sprinkler system's tamper and flow switches.
EOLs
There are Notifier EOL-CR end of line resistor plates on all sprinkler and signal circuits.
Former System Specifications
| System Specifications |
|---|
| FACP: Mircom FA-1000 FACP Location: Electrical Room System Type: Single-Stage Conventional System Line Voltage: 120VAC NAC Voltage: 24VFWR System Coding: Temporal Date of last known Upgrade: Mid-2000s Year Decommissioned: 2020 |
FACP
The building was protected by a Mircom Series 1000 conventional fire alarm system. The panel was located in an electrical room. The system coding was likely temporal.
Notification Appliances
The notification appliances were a mix of mostly Edwards 439D-6AWC (6", Vibrating) bells with some replacement Mircom BL-6B (6", motorized) bells. Value Village had Edwards "Durabel" 6100D vibrating bells (10" gong).
Initiating Devices
Pull Stations
All pull stations were Mircom MS-401 (single action, conventional) pull stations.
Automatic Detection Devices
Most noticed were Mircom C2W-BA (photo, smoke) (System Sensor Rebrand) which is odd because they were not released until sometime after 2000.