Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

New Brighton Athletic Park

From FireAlarmPedia
Revision as of 05:38, 14 October 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: West Bldg. Mechanical Room
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: N/A
Year Opened: 2014

The New Brighton Athletic Park is an outdoor athletic facility located at 5801 130 Avenue SE, in Calgary, Alberta, Canada. The facility is owned and operated by The City of Calgary. This page covers the locker room/maintenance building, which was built in 2014. The fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the west building mechanical room. The system runs Notifier’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All indoor notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a System Sensor P2RKA weatherproof horn/strobe (red, wall-mount) outside the west building mechanical room.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NBG-12LX addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors in the data room and janitor closet.
There are Notifier FST-851A addressable 135°F fixed-temperature heat detectors in the mechanical rooms of each building.
All detectors are mounted on System Sensor B210LPA bases.

Modules[edit | edit source]

There are Notifier ISO-XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on all signal circuits.