Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

The Home Depot (Beacon Hill)

From FireAlarmPedia
Revision as of 11:58, 14 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier AFP-200
FACP Location: Contractor Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Opened: 2005

The Home Depot is an American home improvement store chain. This particular store is located at 11320 Sarcee Trail Northwest, in the Beacon Hill shopping area of Calgary, Alberta, Canada. The store opened in 2006, and the fire alarm system is original.

System Specifications (2005-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier AFP-200 addressable fire alarm system. The panel is located in the contractor entrance vestibule. The system runs Notifier’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All indoor notification appliances are System Sensor “SpectrAlert” P1224MCA horn/strobes (red, wall-mount) mounted on the ceiling. Areas of the garden centre with shelter also have these horn/strobes. The unsheltered areas of the garden centre have System Sensor H12/24KA weatherproof remote horns (red, wall-mount). All horns are set to electromechanical tone. In the Garden centre, there is a System Sensor "SpectrAlert Advance" HRKA (red, wall-mount) weatherproof horn, as a deficiency replacement in 2017.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations but one are Notifier MPS-950B conventional single-action pull stations. The right entrance has a Simplex MS-301C conventional single-action pull station, which does not appear to be a replacement. All pull stations are wired to Notifier FMM-101A addressable monitor modules, located behind each station.

Automatic Detection Devices[edit | edit source]

None noticed.

Accessories[edit | edit source]

There are likely two Notifier FMM-1A addressable monitor modules supervising the sprinkler system.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.