Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

The Home Depot (North Hill)

From FireAlarmPedia
Revision as of 13:00, 14 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: 2010s
Year Opened: 2004

The Home Depot is a chain of hardware stores. This particular store is located at 1818 16 Avenue Northwest, in Calgary, Alberta, Canada. The store opened in 2005, and the fire alarm system is original with the exception of one horn/strobe.

System Specifications (2004-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located at the main entrance. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances but one are Mircom “Select-A-Horn/Strobe” FHS-240R horn/strobes (red, wall-mount, set to 15cd/broadband), mounted on the ceiling.

There is a Mircom FHS-340R horn/strobe (red, wall-mount, set to 15cd/broadband) in the main entrance vestibule as a deficiency replacement.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

None noticed, waterflow present.

Modules[edit | edit source]

There are Mircom MIX-M500MA addressable monitor modules supervising the sprinkler system's tamper and flow switches.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all sprinkler and signal circuits.