Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Yoho National Park Visitor Centre

From FireAlarmPedia
Revision as of 20:45, 14 October 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1025T
FACP Location: Lobby beside doors
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Unknown
Date of last known Upgrade: 2010s
Year Opened: Before 2004


The Yoho National Park Visitor Centre (formerly Travel Alberta Field Visitor Information Centre) is an tourist information center in Field, BC. It is located on the Trans-Canada Highway. It was built sometime before 2004, and the system is not original.

System Specifications (early 2010s-present)[edit | edit source]

FACP[edit | edit source]

The visitor centre is protected by a Mircom FA-1025T conventional fire alarm system. The panel is located after the entrance. The system coding is temporal.

Notification Appliances[edit | edit source]

The notification appliances are Mircom FHS-240R horn/strobes (red, wall-mount, 30cd) in open ceiling areas.

Low ceilings have Potter "Select-A-Horn/Strobe" SH24C-3075110R (red, ceiling mount, set to 30cd) horn/strobes.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

The pull stations are all newer Edwards 270-SPO conventional pull stations.

Automatic Detection Devices[edit | edit source]

None noticed.

EOLs[edit | edit source]

There are Mircom MP-300 end-of-line resistor plates on all circuits.