Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

995 Lansdowne Ave, Toronto

From FireAlarmPedia
Revision as of 19:54, 23 October 2024 by TwentyThree33 (talk | contribs) (How'd I miss this one?!)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FA-1000
FACP Location: Unkonwn
System Type: Single-Stage Conventional
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes
Date of last known Upgrade: N/A
Year Opened: 2016

995 Lansdowne Avenue is the address of a four-story apartment building in Toronto, Ontario. The building opened in 2016, and has the original fire alarm system.

System Specifications (2016-present)[edit | edit source]

NOTE: These system details are unconfirmed. This page should NOT be used for official purposes.

FACP[edit | edit source]

The building is protected by a Mircom FA-1000 conventional fire alarm system. The panel location is unknown. The system coding is temporal.

Annunciators[edit | edit source]

There is a Mircom RA-1000 annunciator enclosure in the main entrance vestibule. It contains two Mircom annunciators, model RAM-1032TZDS and RAM-1048TZDS.

Notification Appliances[edit | edit source]

All notification appliances are Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount). These are likely set to broadband, although this is unconfirmed.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

Not currently known.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all circuits.