Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Calgary Fire Department Station 5

From FireAlarmPedia
Revision as of 12:28, 24 October 2024 by TwentyThree33 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: N/A
Year Opened: 2012

The Calgary Fire Department is the fire department serving The City of Calgary. This page will cover Station 5, located at 3129 14 Street SW, in Calgary, Alberta, Canada. The station was built in 2012, and the fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Notifier’s FlashScan addressable protocol, and the system coding is temporal.

Booster Panels[edit | edit source]

There is a Notifier FCPS-24S8C booster power supply in the second floor mechanical room.

Notification Appliances[edit | edit source]

Most notification appliances are System Sensor “SpectrAlert Advance” P2RA horn/strobes (red, wall-mount, set to 15cd).
All mechanical rooms have System Sensor SWA remote strobes (white, wall-mount, set to 15cd).
All dorm rooms have System Sensor MHWZA silenceable mini horns (white, wall-mount).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier N-MPS-SA addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Notifier FSP-851A addressable photoelectric smoke detectors throughout the building.
There are Notifier FST-851RA addressable 135°F fixed-temperature/rate-of-rise heat detectors in all mechanical rooms.
All detectors are mounted on Notifier B710LPA bases.

Modules[edit | edit source]

There are Notifier FMM-101A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There is a Notifier FMM-1A addressable monitor module supervising the kitchen suppression system.
There are Notifier FRM-1A addressable relay modules serving various purposes.
There are Notifier ISO-XA isolator modules on the SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end of line resistor plates on the kitchen suppression system circuit, and on all sprinkler and signal circuits.