Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Real Canadian Superstore (South Edmonton Common)

From FireAlarmPedia
Revision as of 21:36, 11 November 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Notifier NFS-320C <br />FACP Location: Exit Vestibule <br />System Type: Single Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VDC <br />System Coding: Temporal <br>Strobes Synchronized: Yes, System Sensor <br />Date of last known Upgrade: 2022 <br />Year Opened: 2000 |} '''Real Canadian Superstore''' is a chain of supermarkets owned by Loblaws. This parti...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Notifier NFS-320C
FACP Location: Exit Vestibule
System Type: Single Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Temporal
Strobes Synchronized: Yes, System Sensor
Date of last known Upgrade: 2022
Year Opened: 2000


Real Canadian Superstore is a chain of supermarkets owned by Loblaws. This particular store is located at 9711 23 Ave NW, Edmonton, AB. The store opened in 2000, and the fire alarm system was upgraded in 2022; the pull stations are original.

System Specifications (2022-present)[edit | edit source]

FACP[edit | edit source]

The building is protected by a Notifier NFS-320C addressable fire alarm system. The panel is located in the exit vestibule. The system runs Notifier’s CLIP addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All notification appliances are System Sensor “L-Series” P2RLA horn/strobes (red, wall-mount, set to 15cd/electromechanical).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations but one are Notifier NFM-950B conventional single-action pull stations, wired to Notifier MMX-101A addressable monitor modules.
There is a Notifier NBG-12LX addressable dual-action pull station in the exit vestibule as a deficiency replacement.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There is a Notifier ISO-XA isolator module on the SLC.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits.

Former System Specifications (2000-2022)[edit | edit source]

Former System Specifications
FACP: Notifier AFP-200
FACP Location: Exit Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VDC
System Coding: Continuous
Strobes Synchronized: No
Date of last known Upgrade: N/A
Year Installed: 2000
Year Decommissioned: 2022

FACP[edit | edit source]

The building was protected by a Notifier AFP-200 addressable fire alarm system. The panel was located in the exit vestibule. The system ran Notifier’s CLIP addressable protocol, and the system coding was continuous.

Notification Appliances[edit | edit source]

All notification appliances were Notifier KMS-10-24VDC/P motor bells (10” gong) mounted on Wheelock RSSP-2415W strobe plates (red, 15cd).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Notifier NFM-950B conventional single-action pull stations, wired to Notifier MMX-101A addressable monitor modules. These are still in service on the current system.

Automatic Detection Devices[edit | edit source]

None noticed.

Modules[edit | edit source]

There are Notifier MMX-1A addressable monitor modules supervising the sprinkler system’s tamper and flow switches. They are still in service.

EOLs[edit | edit source]

There are Notifier EOL-CR end-of-line resistor plates on all sprinkler and signal circuits, still in use on the current system.