Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Italian Centre Shop (Sherwood Park)

From FireAlarmPedia
Revision as of 16:31, 20 November 2024 by Alberta Fire Alarms (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Kidde VS4
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Genesis
Date of last known Upgrade: N/A
Year Opened: 2021

Italian Centre Shop is a Canadian chain of grocery stores specializing in Italian products. This particular store is located at #700 8005 Emerald Dr, in Sherwood Park, Alberta, Canada. The store was built in 2021, and the fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Kidde VS4 addressable fire alarm system. The panel is located in the main entrance vestibule. The system runs Kidde’s GSA addressable protocol, and the system coding is temporal.

Notification Appliances[edit | edit source]

All indoor notification appliances are Kidde “Genesis” EG1AVRF horn/strobes (red, wall-mount, set to 15cd).
For outdoor notification, there is a System Sensor “SpectrAlert Advance” SRKA weatherproof remote strobe (red, wall-mount, red lens) outside the main entrance.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Kidde GSA-M270 addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Kidde KI-PD addressable photoelectric smoke detectors at the top of each stairwell, mounted on Kidde KI-SB bases.

Modules[edit | edit source]

There are Kidde GSA-CT1 addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Kidde GSA-IM addressable isolator modules on the SLC.

EOLs[edit | edit source]

There are Edwards EOL-P1 end of line resistor plates on all sprinkler and signal circuits.