Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Laurel Meadows 3303

From FireAlarmPedia
Revision as of 13:07, 29 November 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Main Lobby <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 24VFWR <br />System Coding: Temporal <br>Strobes Synchronized: Yes, Mircom <br />Date of last known Upgrade: N/A <br />Year Opened: 2014 |} '''Laurel Meadows''' is an apartment complex located in Mill Woods, Edmonton, Alberta, Canada. The c...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Lobby
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 24VFWR
System Coding: Temporal
Strobes Synchronized: Yes, Mircom
Date of last known Upgrade: N/A
Year Opened: 2014

Laurel Meadows is an apartment complex located in Mill Woods, Edmonton, Alberta, Canada. The complex is owned and operated by Broadstreet Properties. This page will cover Building 3303, located at 3303 18 Ave NW. The building was built in 2014, and the fire alarm system is original.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 addressable fire alarm system. The panel is located in the main lobby. The system runs Mircom’s CLIP addressable protocol, and the system coding is temporal.

Booster Panels[edit | edit source]

There is a Mircom INX-10A addressable booster power supply on the system.

Notification Appliances[edit | edit source]

All common areas have Mircom “Select-A-Horn/Strobe” FHS-340R horn/strobes (red, wall-mount, set to electromechanical/15cd).
All unit bedrooms plus the leasing office have Mircom MH-S25WA silenceable mini-horns (white).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401AD addressable single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are Mircom MIX-2251APA addressable photoelectric smoke detectors throughout all common areas, mounted on System Sensor B210LPA bases.
There are System Sensor DNRA duct smoke detector housings with Mircom MIX-2251APA addressable photoelectric heads on the main air handling unit.

Modules[edit | edit source]

There are Mircom MIX-M500MAPA addressable monitor modules supervising the sprinkler system’s tamper and flow switches.
There are Mircom MIX-M500RAPA addressable relay modules serving various purposes.
There are System Sensor M500XA isolator modules at each stairwell on each floor.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all sprinkler and signal circuits.