Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Stadium-Armory Station

From FireAlarmPedia
Revision as of 23:06, 18 December 2024 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: ADT EST3 <br />FACP Location: Fire Equipment Room <br />System Type: Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: N/A <br />System Coding: Message Only <br>Strobes Synchronized: N/A <br />Date of last known Upgrade: 2010s <br />Year Opened: 1977 |} '''Stadium-Armory Station''' is a WMATA train station located at 192 19th St SE, in Washington, DC, USA. The statio...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: ADT EST3
FACP Location: Fire Equipment Room
System Type: Addressable
System Line Voltage: 120VAC
NAC Voltage: N/A
System Coding: Message Only
Strobes Synchronized: N/A
Date of last known Upgrade: 2010s
Year Opened: 1977

Stadium-Armory Station is a WMATA train station located at 192 19th St SE, in Washington, DC, USA. The station was built in 1977, and the fire alarm system was upgraded in the 2010s.

System Specifications (2010s-present)[edit | edit source]

FACP[edit | edit source]

The station is protected by an ADT EST3 addressable fire alarm system. The panel is located in the fire equipment room. The system runs ADT’s Signature addressable protocol, and is equipped with voice evacuation. The evacuation signal is a custom message; the system does not have an evacuation tone.

Annunciators[edit | edit source]

There is an ADT EST3-LCDANN annunciator in the station manager’s office.

Notification Appliances[edit | edit source]

All system audio goes through the station’s public address system; there are no dedicated notification appliances on this system.

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are ADT ADT-278 addressable dual-action pull stations.

Automatic Detection Devices[edit | edit source]

There are ADT ADT-PS addressable photoelectric smoke detectors in all elevator lobbies, mounted on EST SIGA-SB bases.