Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

We have switched hosting. Sorry for the recent downtime. :)

Stanley Park Apartments (Calgary)

From FireAlarmPedia
Revision as of 15:21, 19 January 2025 by Alberta Fire Alarms (talk | contribs) (Created page with "{| style="float:right;border:2px solid black" |- ! System Specifications |- | |- | FACP: Mircom FX-2000 <br />FACP Location: Main Entrance Vestibule <br />System Type: Single-Stage Addressable <br />System Line Voltage: 120VAC<br />NAC Voltage: 70.7VRMS <br />System Coding: Unknown <br>Strobes Synchronized: N/A <br />Date of last known Upgrade: 2004 <br />Year Opened: 1981 |} '''Stanley Park Apartments''' is a high-rise residential tower located at 4637 Macleod Trail...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
System Specifications
FACP: Mircom FX-2000
FACP Location: Main Entrance Vestibule
System Type: Single-Stage Addressable
System Line Voltage: 120VAC
NAC Voltage: 70.7VRMS
System Coding: Unknown
Strobes Synchronized: N/A
Date of last known Upgrade: 2004
Year Opened: 1981


Stanley Park Apartments is a high-rise residential tower located at 4637 Macleod Trail SW, in Calgary, Alberta, Canada. The building consists of retail on the ground floor, with the rest of the building being solely apartments. The building was built in 1981, and the fire alarm system was upgraded in 2004.

System Specifications[edit | edit source]

FACP[edit | edit source]

The building is protected by a Mircom FX-2000 conventional fire alarm system. The panel is located in the main entrance vestibule. The system is equipped with Mircom’s QX-5000 voice evacuation system; the evacuation signal is unknown.

Notification Appliances[edit | edit source]

All notification appliances are Mircom SP-208-70 remote speakers (white, ceiling-mount, 70V).

Initiating Devices[edit | edit source]

Pull Stations[edit | edit source]

All pull stations are Mircom MS-401 conventional single-action pull stations.

Automatic Detection Devices[edit | edit source]

There are System Sensor C2W-BA conventional photoelectric smoke detectors throughout the building.

EOLs[edit | edit source]

There are Mircom MP-300 end of line resistor plates on all circuits.